Rockford Fosgate 800 Watt 4-Channel M5 Element Ready Amplifier
The Rockford Fosgate 800 Watt 4-Channel M5 Element Ready Amplifier features an Element Ready design with integrated harness and panel seals. The PRESET features will make set-up and tuning instantaneous when used with Rockford Fosgate UTV audio kits.
Features:
- Element Ready design with integrated harness and panel seals
- PRESET removes the need to set-up and tune the amp when used with Rockford Fosgate UTV audio kits
- C.L.E.A.N. input/output clip detection and indicator LEDs
- Constant Power provides instantaneous delivery of output over varying impedance loads
- Top mounted control panel with Element Ready smoked lens cover
- Low Impedance Stability
- Proprietary testing using RATS (Rockford Automated Testing System)
- Proprietary Class-AD technology allows amplifier to produce more power with less current draw
- Discrete Surface Mount technology utilizes 1% tight-tolerances for high efficiency and reduced cross-talk
- MESHA 4 reduces MOSFET temps, lowers distortion, increases durability and prolongs device life span
- Chassis Isolation from mounting points greatly reduces possible introduction of vehicle noise
- Balanced Differential Inputs eliminates noise picked up by signal cables
- Remote-Out feature when using high level inputs
Specifications:
- CEA-2006 Compliant / Cta-2006 Compliant
- Number of Channels 4
- Total Power (Sum of Rated Power)800 Watts
- CTA-2006 Continuous Power Rating 100 Watts x 4 @ 4Ω / 100 Watts x 4 @ 2Ω / 200 Watts x 2 @ 4Ω Bridged/Mono ≤1.0% THD+N
- CTA-2006 Dynamic Power Rating 125 Watts x 4 @ 4Ω / 200 Watts x 4 @ 2Ω / 400 Watts x 2 @ 4Ω Bridged/Mono
- Bridgeable Yes
- Frequency Response 10 Hz – 50 kHz
- Input Sensitivity 150mVrms – 12Vrms
- Circuit Topology Class Class-AD
- Efficiency (average) >75%
- Total Harmonic Distortion (THD+Noise) <0.25% THD+N @ 1 Watt
- Signal Input Low-Level: 4 RCA
- High-Level: (2) 4-Pin Molex
- Tone Controls Front/Rear: 0-14dB @ 12.5kHz / Front/Rear: 0-18dB @ 45Hz
- Crossover Controls High-Pass: 50 Hz – 250 Hz @ 12dB/Octave Butterworth / Low-Pass: 50 Hz – 250 Hz @ 12dB/Octave Butterworth
- All-Pass: Yes
- Remote Controls No
- Visual Indicators Power: Blue / Protect: Red / Input Clip: Red / Output Clip: Blue/Red
- Power Wire Gauge 8 AWG
- Power Input Connector Compression Terminal Block
- Speaker Wire Gauge 16 AWG
- Speaker Output Connector 4-Pin Molex
- Cooling Convection
- Heatsink Extruded Aluminum
- Operating Voltage 9 – 16 VDC
- Max. Current Draw (13.8V Sinewave) 55 A @ 4Ω / 85 A @ 2Ω / 90 A @ 4Ω Bridged
- Dimensions (H x W x D) 1.7″ x 4.25″ x 8.41″ (42.8 mm x 108 mm x 213 mm)
